CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Static Phase Converters

Posted by deepcavity
on 2005-04-02 11:15:20 UTC
Hi Dave, Yes static phase converters are fine...often better than
having a motor running all the time while you are working. Also
with static converters you can have a converter at each machine
you have and just turn on the machine you are using.You can
build your own starting cap approx 330mfd for ,motors to 3 hp a
run cap 25 /30 mfd,and a relay that will close and switch out
the start cap when the motor starts. Hope this helps.
allan
----- Original Message -----
From: "Dave Shiels" <dshiels@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, April 02, 2005 10:59 AM
Subject: [CAD_CAM_EDM_DRO] Static Phase Converters


>
> Anyone used Static Phase Converters? Are they anygood. The price points
> are much more attractive than a motor driven one.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

Dave Shiels 2005-04-02 10:59:14 UTC Static Phase Converters R Rogers 2005-04-02 11:11:48 UTC Re: [CAD_CAM_EDM_DRO] Static Phase Converters deepcavity 2005-04-02 11:15:20 UTC Re: [CAD_CAM_EDM_DRO] Static Phase Converters rickchownyk2000 2005-04-02 11:51:32 UTC Re: Static Phase Converters STAN MCDONALD 2005-04-02 11:51:38 UTC Re: [CAD_CAM_EDM_DRO] Static Phase Converters JanRwl@A... 2005-04-02 18:57:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Static Phase Converters Ron Kline 2005-04-02 21:07:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Static Phase Converters Ron Ginger 2005-04-03 08:14:05 UTC Re: Static Phase Converters Abby Katt 2005-04-03 08:51:37 UTC Balllscrew time! turbulatordude 2005-04-03 09:40:52 UTC Re: Static Phase Converters - simple schematic John Stevenson 2005-04-03 09:55:51 UTC Re: Balllscrew time! turbulatordude 2005-04-03 10:09:56 UTC Re: Static Phase Converters cnc002@a... 2005-04-03 12:02:30 UTC Re: [CAD_CAM_EDM_DRO] Static Phase Converters turbulatordude 2005-04-04 07:24:15 UTC Re: Static Phase Converters