CAD CAM EDM DRO - Yahoo Group Archive

Re: VSD's and Line Reactors

Posted by jimkunzweiler
on 2005-04-06 09:49:48 UTC
> I'm looking for a low cost VSD for a 3/4 HP 3ph motor for use on my
9"
> lathe.
>
> AutomationDirect has a 1hp unit for under $200 but 'highly recomends'
a
> Line Reactor. The Line Reactor is about the same price as the VSD.
>
> My questions are.
>
> Is a Line Reactor a good feature or not needed in a home shop. We
have


Dave
Line / load reactors are generally recommended by drive mfg for wiring
runs of greater than 100'and motors >20hp. If you keep the drive close
to the motor you shouldn't need one.

Discussion Thread

turbulatordude 2005-04-06 09:02:20 UTC VSD's and Line Reactors jimkunzweiler 2005-04-06 09:49:48 UTC Re: VSD's and Line Reactors Jon Elson 2005-04-06 10:13:47 UTC Re: [CAD_CAM_EDM_DRO] VSD's and Line Reactors washcomp 2005-04-06 10:24:34 UTC Re: VSD's and Line Reactors turbulatordude 2005-04-06 12:15:57 UTC Re: VSD's and Line Reactors STAN MCDONALD 2005-04-06 13:58:18 UTC Re: [CAD_CAM_EDM_DRO] VSD's and Line Reactors