Re: [CAD_CAM_EDM_DRO] old denford pnc2c controller

Hi There
Check the micro switch / homing conection leads on the end have not dropped
off.
If ok check the switch is working.
If it goes to the end it is not finding the homing position.
I think the old PNC2C controller was a North East Electronics version.
It was state of the art in its day. It will probably do all that you require.
regards David

At 09:55 20/04/2005, you wrote:

>hi all have bought an old 1982 denford easiturn lathe
>with what is called a PNC2C controler, poss state of the art in the
>early eighties got it home and may be due to the 100 mile trip, has
>decided not to goo, as per the instructions, when press the zero, the
>x axe crashes into the end, has any one out there have any knowledge
>to help me sort this out, short term untill i decide on putting in a
>new system , and where should i go with that one? many thanks
>shropshire steve uk
>
>
>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@...
>davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>