CAD CAM EDM DRO - Yahoo Group Archive

Re: Backlash effect on Part accuracy

on 2005-05-20 22:20:35 UTC
Hi Jon,

What is climb mill and what is it's advantage?


Thanks.










--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> shadi_salhab_78 wrote:
>
> >Hi all,
> >
> >I'am facing a big amount of backlash in my mill , will that
affect
> >the final accuracy of the machined part even if the cnc program
> >composate for the backlash ?
> >
> Yes. The motors can't get from one side of the backlash to the
other
> instantly, so it will
> leave mars on the surface. You also can't climb mill, which is
very
> advantageous.
>
> > When I should start to think of zero
> >backlash ballscew?
> >
> >
> Now!
>
> Jon

Discussion Thread

shadi_salhab_78 2005-05-18 23:11:36 UTC Backlash effect on Part accuracy Jon Elson 2005-05-19 08:04:12 UTC Re: [CAD_CAM_EDM_DRO] Backlash effect on Part accuracy shadi_salhab_78 2005-05-20 22:20:35 UTC Re: Backlash effect on Part accuracy Tom Hubin 2005-05-20 22:56:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy Jon Elson 2005-05-21 12:54:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy Michael Larson 2005-05-21 15:49:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy turbulatordude 2005-05-21 16:42:17 UTC Re: Backlash effect on Part accuracy Luke1027 2005-05-21 17:20:35 UTC [CAD_CAM_EDM_DRO] Choosing Power/Volts on Stepper Motor Robert Campbell 2005-05-21 17:27:27 UTC Re: [CAD_CAM_EDM_DRO] Choosing Power/Volts on Stepper Motor Luke1027 2005-05-21 18:13:12 UTC Re: [CAD_CAM_EDM_DRO] Choosing Power/Volts on Stepper Motor Robert Campbell 2005-05-21 18:51:33 UTC Re: [CAD_CAM_EDM_DRO] Choosing Power/Volts on Stepper Motor turbulatordude 2005-05-21 19:02:18 UTC Re: Choosing Power/Volts on Stepper Motor Jon Elson 2005-05-21 23:06:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy Jon Elson 2005-05-21 23:09:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy R Rogers 2005-05-22 06:09:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Backlash effect on Part accuracy Michael Larson 2005-05-24 15:37:20 UTC Controlling +/- 10V Servo Amps Codesuidae 2005-05-24 18:07:35 UTC Re: [CAD_CAM_EDM_DRO] Controlling +/- 10V Servo Amps Jon Elson 2005-05-24 20:37:49 UTC Re: [CAD_CAM_EDM_DRO] Controlling +/- 10V Servo Amps Jon Elson 2005-05-24 20:40:16 UTC Re: [CAD_CAM_EDM_DRO] Controlling +/- 10V Servo Amps Michael Larson 2005-05-24 21:08:23 UTC Re: [CAD_CAM_EDM_DRO] Controlling +/- 10V Servo Amps David Speck 2005-05-24 21:16:07 UTC Re: [CAD_CAM_EDM_DRO] Controlling +/- 10V Servo Amps Babar 2005-05-24 21:57:04 UTC Re: [CAD_CAM_EDM_DRO] EMC ,STG-II Alan Marconett 2005-05-25 08:07:06 UTC RE: [CAD_CAM_EDM_DRO] EMC ,STG-II Jon Elson 2005-05-25 10:13:01 UTC Re: [CAD_CAM_EDM_DRO] EMC ,STG-II Keith Rumley 2005-05-25 14:36:31 UTC RE: [CAD_CAM_EDM_DRO] EMC ,STG-II Babar 2005-05-25 21:16:10 UTC RE: [CAD_CAM_EDM_DRO] EMC ,STG-II Paul 2005-05-26 07:53:30 UTC Re: [CAD_CAM_EDM_DRO] EMC ,STG-II Babar 2005-05-26 20:40:45 UTC Re: [CAD_CAM_EDM_DRO] EMC ,STG-II Keith Rumley 2005-05-27 04:20:44 UTC RE: [CAD_CAM_EDM_DRO] EMC ,STG-II