CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] W.E.T.Re: BOSS stepper driver transistor

Posted by paul dick
on 2005-05-27 11:37:02 UTC
wthomas@... wrote:

>Hi Scott and All:
> From my experience repairing a Bridgeport CNC (I believe it was
>a model II) The former owner had traded it in because the Z axis had
>failed a couple of times and he was tired of the expensive service
>call to fix it. Upon checking with the Bridgeport service department
>and talking with an old timer he told me where look and locate the
>bad transistor. Once I found it and pulled the board, it cost me
>more to buy a large soldering gun, big enough to do the job,
>then it did for the one transistor that went bad. After that we keep
>a couple spare transistor around as it would always go out right when
>we needed to get parts done. So I would recommend buying a couple
>extra and having them on hand. MAY THE CHIPS SOON FLY
> GOD'S BLESSINGS
> Bill
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
> hi guys the transistor you need is a 2N6547 i used to run 3 bridgeports, 2 bos 5's annd a bos 6 and the Zaxis blowing trannys is a very common problem but its a quick and easy fix
>
>

>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

Discussion Thread

Polaraligned 2005-05-26 15:50:01 UTC BOSS stepper driver transistor Roy J. Tellason 2005-05-26 16:00:52 UTC Re: [CAD_CAM_EDM_DRO] BOSS stepper driver transistor Polaraligned 2005-05-26 16:31:50 UTC Re: BOSS stepper driver transistor wthomas@g... 2005-05-26 21:37:15 UTC W.E.T.Re: BOSS stepper driver transistor Luke1027 2005-05-27 06:23:30 UTC Re: [CAD_CAM_EDM_DRO] W.E.T.Re: BOSS stepper driver transistor Roy J. Tellason 2005-05-27 10:56:38 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS stepper driver transistor paul dick 2005-05-27 11:37:02 UTC Re: [CAD_CAM_EDM_DRO] W.E.T.Re: BOSS stepper driver transistor Polaraligned 2005-05-27 13:04:29 UTC Re: BOSS stepper driver transistor Roy J. Tellason 2005-05-27 13:54:24 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS stepper driver transistor saullios 2005-12-27 12:09:34 UTC Re: BOSS stepper driver transistor