Re: [CAD_CAM_EDM_DRO] Sizing a power supply

In a message dated 06/13/2000 9:16:50 AM Hawaiian Standard Time,
jmelson@... writes:

<< Yes, if you have a transformer with the adjustment taps, then you are
set. Otherwise, you
could use a 208/220 volt autotransformer in front of the isolation
transformer to vary
the output voltage.

Jon

>>

Jon,

Thank You for the info. Along with the sizing info of the filter caps, I
think building a workable PS should be a snap.

I'll get busy.

Peter
THRD, Inc.