Re: Sizing a power supply

Peter,

You can also connect a "filament" (sp?) transformer in series with
the
primary of your power transformer. Connect it so it "bucks" 12.6v or
whatever you need. You can also "boost" by this same method.

Alan

--- In CAD_CAM_EDM_DRO@egroups.com, ptengin@a... wrote:
> In a message dated 06/13/2000 9:16:50 AM Hawaiian Standard Time,
> jmelson@a... writes:
>
> << Yes, if you have a transformer with the adjustment taps, then
you
are
> set. Otherwise, you
> could use a 208/220 volt autotransformer in front of the isolation
> transformer to vary
> the output voltage.
>
> Jon
> >>
>
> Jon,
>
> Thank You for the info. Along with the sizing info of the filter
caps, I
> think building a workable PS should be a snap.
>
> I'll get busy.
>
> Peter
> THRD, Inc.