CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] servo motors for BP clone

Posted by Zafar Salam
on 2005-06-15 18:25:35 UTC
Thanks Jon for the reply. My existing setup has 550 oz-in steppers with acme
screws and 2:1 belt reduction. I can get 80 ipm rapids with that. A few dc
servo motors I have seen so far had watts rating on them. How do you
calculate the torque from that.

Zafar



> Zafar Salam wrote:
>
> >Hi,
> >
> >After running my BP clone on steppers and acme screws for 6 months, I've
decided to upgrade to ball screws and servos. What size motors would be
suitable for that purpose. I'll go with geckos and turbocnc. I would
appreciate help from anyone who has alread done that as this would be my
first experience with servo motors and drives.
> >
> >
> It depends on whether you plan to direct-drive the screws, or use a belt
> reduction.
> A much smaller servo motor can be used if you use the reduction. For
> instance,
> a 4:1 reduction will increase torque to the leadscrew by a factor of 4.
> I am
> using motors good for about 250 Oz-In peak with a 2.5:1 belt reduction.
> Some people who really want to show off how fast their machine can move
> insist you need LOTS more torque. But, I find this system is strong
> enough to
> snap 3/8" end mills off in the collet without faulting the servo, and
> can do 120
> IPM with no problem. That is WAY more than I need, and any more would
> just be
> a hazard.
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

Discussion Thread

Zafar Salam 2005-06-14 18:42:20 UTC servo motors for BP clone Jon Elson 2005-06-14 22:58:39 UTC Re: [CAD_CAM_EDM_DRO] servo motors for BP clone Polaraligned 2005-06-15 04:07:24 UTC Re: servo motors for BP clone R Rogers 2005-06-15 06:00:03 UTC Re: [CAD_CAM_EDM_DRO] servo motors for BP clone Zafar Salam 2005-06-15 18:25:35 UTC Re: [CAD_CAM_EDM_DRO] servo motors for BP clone Zafar Salam 2005-06-15 18:27:10 UTC Re: [CAD_CAM_EDM_DRO] servo motors for BP clone Jon Elson 2005-06-15 22:15:34 UTC Re: [CAD_CAM_EDM_DRO] servo motors for BP clone Andrey Lipavsky 2005-06-15 22:49:12 UTC [CAD_CAM_EDM_DRO] Quadrature encoders Alan Marconett 2005-06-16 08:41:21 UTC [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders CalBoy101 2005-06-16 11:43:31 UTC Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders Andrey Lipavsky 2005-06-18 15:19:32 UTC RE: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders KM6VV 2005-06-18 16:39:01 UTC Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders CalBoy101 2005-06-20 09:13:27 UTC Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders Andrey Lipavsky 2005-07-07 20:01:08 UTC RE: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders JCullins 2005-07-08 04:24:24 UTC Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders KM6VV 2005-07-08 17:20:58 UTC Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders