Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
Posted by
CalBoy101
on 2005-06-20 09:13:27 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Andrey Lipavsky"
<alipavsky@i...> wrote:
mechanical "click".
The Bournes encoders are just switches. If you are connecting them
to a device like an Ipac keyboard interface board ( see
http://www.ultimarc.com/ipac1.html ), just wire them directly to the
Ipac terminals. If you are connecting them to a quadrature input,
like on a breakout board like the one from www.campbelldesigns.com
then wire 5 volts to the switch so that it brings the board input up
to 5 volts when the switch is closed.
Paul T.
<alipavsky@i...> wrote:
> So do I want the unit with 6 cycles and 0 detents per rev or 6cycles and 24
> detents?6 cycles and 24 detents. That way you will get one increment per
>
> Also, any recommendations/circuits for wiring up these things?
>
> Andrey
>
mechanical "click".
The Bournes encoders are just switches. If you are connecting them
to a device like an Ipac keyboard interface board ( see
http://www.ultimarc.com/ipac1.html ), just wire them directly to the
Ipac terminals. If you are connecting them to a quadrature input,
like on a breakout board like the one from www.campbelldesigns.com
then wire 5 volts to the switch so that it brings the board input up
to 5 volts when the switch is closed.
Paul T.
Discussion Thread
Zafar Salam
2005-06-14 18:42:20 UTC
servo motors for BP clone
Jon Elson
2005-06-14 22:58:39 UTC
Re: [CAD_CAM_EDM_DRO] servo motors for BP clone
Polaraligned
2005-06-15 04:07:24 UTC
Re: servo motors for BP clone
R Rogers
2005-06-15 06:00:03 UTC
Re: [CAD_CAM_EDM_DRO] servo motors for BP clone
Zafar Salam
2005-06-15 18:25:35 UTC
Re: [CAD_CAM_EDM_DRO] servo motors for BP clone
Zafar Salam
2005-06-15 18:27:10 UTC
Re: [CAD_CAM_EDM_DRO] servo motors for BP clone
Jon Elson
2005-06-15 22:15:34 UTC
Re: [CAD_CAM_EDM_DRO] servo motors for BP clone
Andrey Lipavsky
2005-06-15 22:49:12 UTC
[CAD_CAM_EDM_DRO] Quadrature encoders
Alan Marconett
2005-06-16 08:41:21 UTC
[Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
CalBoy101
2005-06-16 11:43:31 UTC
Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
Andrey Lipavsky
2005-06-18 15:19:32 UTC
RE: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
KM6VV
2005-06-18 16:39:01 UTC
Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
CalBoy101
2005-06-20 09:13:27 UTC
Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
Andrey Lipavsky
2005-07-07 20:01:08 UTC
RE: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
JCullins
2005-07-08 04:24:24 UTC
Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders
KM6VV
2005-07-08 17:20:58 UTC
Re: [Spam] RE: [CAD_CAM_EDM_DRO] Quadrature encoders