RE: [CAD_CAM_EDM_DRO] DC Speed controller
Posted by
Andrey Lipavsky
on 2005-06-25 19:06:21 UTC
Terry,
Try this link:
http://www.electronickits.com/kit/complete/motor/ck1400.htm
It can handle 100V, up to 17 amps if you beef up the traces, per the
description. At $20, it's a bargain, however it is a kit.
Andrey
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Blue
Sent: Saturday, June 25, 2005 8:21 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] DC Speed controller
Hi,
Does anyone have a circuit diagram for a PWM speed control for a perminant
magnet DC motor of 2hp running at 110 volts? If so could you send it to me
off-list? I don't want to spend too much of the hard earned on this as it is
only going to be used to drive my milling table until I get some Gecko's
running.
Regards,
Terry
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Try this link:
http://www.electronickits.com/kit/complete/motor/ck1400.htm
It can handle 100V, up to 17 amps if you beef up the traces, per the
description. At $20, it's a bargain, however it is a kit.
Andrey
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Blue
Sent: Saturday, June 25, 2005 8:21 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] DC Speed controller
Hi,
Does anyone have a circuit diagram for a PWM speed control for a perminant
magnet DC motor of 2hp running at 110 volts? If so could you send it to me
off-list? I don't want to spend too much of the hard earned on this as it is
only going to be used to drive my milling table until I get some Gecko's
running.
Regards,
Terry
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Blue
2005-06-25 18:20:18 UTC
DC Speed controller
campgems
2005-06-25 18:44:46 UTC
Re: DC Speed controller
Andrey Lipavsky
2005-06-25 19:06:21 UTC
RE: [CAD_CAM_EDM_DRO] DC Speed controller
turbulatordude
2005-06-25 23:27:39 UTC
Re: DC Speed controller
Blue
2005-06-26 17:52:46 UTC
Re: [CAD_CAM_EDM_DRO] DC Speed controller
victorlorenzo
2005-06-26 18:43:47 UTC
Re: DC Speed controller
wanliker@a...
2005-06-26 19:28:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: DC Speed controller
Blue
2005-06-27 11:05:51 UTC
Re: [CAD_CAM_EDM_DRO] DC Speed controller
Wayne Weedon
2005-06-27 11:43:25 UTC
Re: [CAD_CAM_EDM_DRO] DC Speed controller
Nader Atifeh
2005-06-29 19:55:56 UTC
Re: DC Speed controller-OT