CAD CAM EDM DRO - Yahoo Group Archive

Re: Home built machine setup, perpendicularity

on 2005-07-07 18:47:14 UTC
<snip>
> You can play games with Pythagorus and such or generate three sets of
> precise squares
> if you have a very accurate surface plate but it takes a lot of time.
<snip>
> Leslie M.Watts
> L M Watts Furniture
> Tiger Georgia
> (706) 212-0242
>
> Main page:
> http://www.lmwatts.com
> Engineering:
> http://www.lmwatts.com/shop.html
> Cnc surplus for sale:
> http://www.lmwatts.com/forsale.html
> Carved signs:
> http://www.lmwatts.com/signwp.html
>

Pythagoras has the answer to correcting a built machine.

I like to have the ability to adjust things after, espically in the
home brew where the cost to re-locate some holes can mean replacing an
expensive part.

Dave

Discussion Thread

Scott Riddle 2005-07-07 06:58:57 UTC Home built machine setup, perpendicularity turbulatordude 2005-07-07 08:15:16 UTC Re: Home built machine setup, perpendicularity JanRwl@A... 2005-07-07 12:24:23 UTC Re: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Leslie Watts 2005-07-07 15:40:50 UTC RE: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity cnc002@a... 2005-07-07 15:42:21 UTC Re: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Jim Colley 2005-07-07 17:11:02 UTC Re: Home built machine setup, perpendicularity R Rogers 2005-07-07 18:23:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Home built machine setup, perpendicularity turbulatordude 2005-07-07 18:47:14 UTC Re: Home built machine setup, perpendicularity Scott Riddle 2005-07-08 06:01:02 UTC Re: Home built machine setup, perpendicularity David A. Frantz 2005-07-08 11:34:10 UTC Re: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Jon Elson 2005-07-08 19:07:50 UTC Re: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Leslie Watts 2005-07-09 14:13:33 UTC RE: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Drew Rogge 2005-07-12 07:51:15 UTC RE: [CAD_CAM_EDM_DRO] Home built machine setup, perpendicularity Elliot Burke 2005-07-13 09:50:56 UTC re:RE: Home built machine setup, perpendicularity