Re: [CAD_CAM_EDM_DRO] proximity sensor

Yes you can use either. Just make sure you set MachX up to match normally
closed or open.
with normally open check the box to make it active low
' ' closed Uncheck the box for active high.
You have 12v there for power to them.
Jim

----- Original Message -----
From: "alphawolf45" <haushahn@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, August 16, 2005 8:01 PM
Subject: [CAD_CAM_EDM_DRO] proximity sensor


> I got the Cullins/Campbell breakout board.It designed for use with
> NPN inductive proximity sensors..Can either normally open or normally
> closed sensors be used ? Anything else besides the working voltage to
> look out for?
> Steven
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>