Re: cnc/copy mill teach
Posted by
c_holm10017
on 2005-09-09 12:48:49 UTC
Steve,
It sounds as though you want a regular 3d digitizer.
Microscribe is one that seems to get pretty good reviews.
http://www.immersion.com/digitizer/
Here is a site that describes use of the Microscribe digitizer.
http://palaeo-electronica.org/2002_2/scan/three.htm
Chris
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Steve Haushahn"
<haushahn@c...> wrote:
with rotary encoders to follow/read table travel..Then having stylus
in the conventional vert mill orientation. I would like to have
gunpart - a hammer, trigger , lever whatever, mounted on table ,
then push table so stylus follows part contour and then have the
encoders send those changing coordinates to computer in teach
mode.....The intention is similar to digitizing but considerably
faster for getting X/Y - possibly Z coordinates into the 'puter...
It sounds as though you want a regular 3d digitizer.
Microscribe is one that seems to get pretty good reviews.
http://www.immersion.com/digitizer/
Here is a site that describes use of the Microscribe digitizer.
http://palaeo-electronica.org/2002_2/scan/three.htm
Chris
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Steve Haushahn"
<haushahn@c...> wrote:
> The parts I am most wanting to make are copies of gun parts...WhatI would like is a 2 axis stage on ball bearings - no lead screws-
with rotary encoders to follow/read table travel..Then having stylus
in the conventional vert mill orientation. I would like to have
gunpart - a hammer, trigger , lever whatever, mounted on table ,
then push table so stylus follows part contour and then have the
encoders send those changing coordinates to computer in teach
mode.....The intention is similar to digitizing but considerably
faster for getting X/Y - possibly Z coordinates into the 'puter...
> Anybody want to comment on what might be done to put this copystage together? Surely somebody has already done this , anybody?
> Steven
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
Steve Haushahn
2005-09-09 11:09:51 UTC
cnc/copy mill teach
Alan Marconett
2005-09-09 11:48:35 UTC
RE: [CAD_CAM_EDM_DRO] cnc/copy mill teach
c_holm10017
2005-09-09 12:48:49 UTC
Re: cnc/copy mill teach
Steve Haushahn
2005-09-09 15:32:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach
Steve Haushahn
2005-09-09 15:43:40 UTC
Re: [CAD_CAM_EDM_DRO] cnc/copy mill teach
Alan Marconett
2005-09-09 16:09:15 UTC
RE: [CAD_CAM_EDM_DRO] cnc/copy mill teach
Steve Haushahn
2005-09-09 17:30:49 UTC
Re: [CAD_CAM_EDM_DRO] cnc/copy mill teach
Ron Ginger
2005-09-10 06:32:19 UTC
Re: cnc/copy mill teach
Graham Stabler
2005-09-12 05:59:12 UTC
Re: cnc/copy mill teach
art
2005-09-12 19:59:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach
Graham Stabler
2005-09-13 03:58:10 UTC
Re: cnc/copy mill teach
Steve Haushahn
2005-09-15 09:58:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach
art
2005-09-15 17:15:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach
Steve Haushahn
2005-09-16 09:52:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach
art
2005-09-17 19:52:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: cnc/copy mill teach