CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver

Posted by Weedy
on 2005-09-12 00:45:07 UTC
Dave/Jon,

So, are we back to:
W = 4 x 60 x 6 x 0.66 or
W = 4 x 60 x 6 x 0.66 x 1.8?

The 1.8 is from Steve as quote below:
"Transformer manufacturers generally recommend that you compensate for this
by applying a factor of 1.8 times the desired DC output current to specify
the RMS current rating needed for the transformer."

Weedy


>>Hi Guys,
>>
>>I'm back and reading thru the posts.
>>
>>The basis starts that the namepalte current is used to hold in
>>posistion. Fine, that makes sense.
>>
>>Noboby argued with what Steve had said that more current is needed to
>>overcome the back EMF in the coil, so I'll work with that.
>>
>>
> OK, I'll argue. More VOLTAGE is needed to overcome the back-EMF.
>
>>and it seems the agreement is that more power is needed as the motor
>>is acelerated. This is interesting as over the years I have seen a
>>lot of people ask why their steppers are missing steps. This
>>certainly can be one reason.
>>
>>The motor we were discussing as 2.4 volts and 6 amps. and we were
>>using 60 volts as the DC power supply.
>>
>>Jon, you mentioned that an acelerating motor can go up to 60 * 7 * .66
>>
>>
> I'm not sure where the 7 comes from. Can you elaborate on this formula ?
>
> Oh, I guess I was thinking of the Gecko's 7 A maximum. In this case it
> would
> be 60 * 6 * .66
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

Weedy 2005-09-08 20:26:22 UTC Power Supply for 4-axis CNC stepper driver Steve Stallings 2005-09-09 07:33:30 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 08:49:25 UTC Re: Power Supply for 4-axis CNC stepper driver John Johnson 2005-09-09 08:54:20 UTC Re: [CAD_CAM_EDM_DRO] Power Supply for 4-axis CNC stepper driver Steve Stallings 2005-09-09 09:20:51 UTC Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 09:22:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 09:22:55 UTC RE: [CAD_CAM_EDM_DRO] Power Supply for 4-axis CNC stepper driver Mike Richards 2005-09-09 09:33:54 UTC Re: Power Supply for 4-axis CNC stepper driver wanliker@a... 2005-09-09 09:39:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 11:00:18 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 11:09:14 UTC Re: Power Supply for 4-axis CNC stepper driver Steve Stallings 2005-09-09 11:19:01 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 11:22:19 UTC Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 12:00:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 13:04:49 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 13:16:20 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 13:29:15 UTC Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 13:35:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 14:15:46 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 14:46:37 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-09 15:02:19 UTC Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-09 15:09:31 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver Jon Elson 2005-09-09 18:18:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver Weedy 2005-09-10 00:59:53 UTC Re: Power Supply for 4-axis CNC stepper driver John Dammeyer 2005-09-10 09:40:38 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver Jon Elson 2005-09-10 17:04:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver Mariss Freimanis 2005-09-10 17:24:40 UTC Re: Power Supply for 4-axis CNC stepper driver Mariss Freimanis 2005-09-10 18:01:07 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-11 18:51:11 UTC Re: Power Supply for 4-axis CNC stepper driver Jon Elson 2005-09-11 22:43:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver Weedy 2005-09-12 00:45:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-12 07:08:44 UTC Re: Power Supply for 4-axis CNC stepper driver turbulatordude 2005-09-13 14:44:47 UTC Re: Power Supply - Gecko White Paper