Re: [CAD_CAM_EDM_DRO] Can you make a close loop system using digital calibers?
Posted by
Tony Jeffree
on 2005-10-25 23:25:01 UTC
At 02:14 26/10/2005, you wrote:
PC screen - the software uses the communication protocol that the scales
understand to force a much higher reading rate - every 50 millisecnds I
believe.
Regards,
Tony
> >I did a search but could not find the answer so I have to ask. I wantThere's a system available in the UK that uses these scales to display on a
> >to convert a mini-mill over to cnc and currently have Chinese calibers
> >mounted as DROs but I have not done anything to reduce backlash. I
> >know the signals can be read by a DRO box by ShumaTech and there is
> >also an adapter to convert the signal into the more uniform standard.
> >
> >
>No. The problem is the calipers only produce about 2 readings a second.
>You need something that can produce at least a hundred readings a second
>to begin to do closed loop motion control with it. We usually use 1000
>readings
>a second with EMC, but some users demand even more.
PC screen - the software uses the communication protocol that the scales
understand to force a much higher reading rate - every 50 millisecnds I
believe.
Regards,
Tony
Discussion Thread
wsampl00
2005-10-25 17:27:12 UTC
Can you make a close loop system using digital calibers?
R Rogers
2005-10-25 17:34:04 UTC
Re: [CAD_CAM_EDM_DRO] Can you make a close loop system using digital calibers?
Jon Elson
2005-10-25 18:20:10 UTC
Re: [CAD_CAM_EDM_DRO] Can you make a close loop system using digital calibers?
Paul Kelly
2005-10-25 18:25:03 UTC
RE: [CAD_CAM_EDM_DRO] Can you make a close loop system using digital calibers?
Tony Jeffree
2005-10-25 23:25:01 UTC
Re: [CAD_CAM_EDM_DRO] Can you make a close loop system using digital calibers?