Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive

Compumotor offers encoders(incremental) and absolute
encoders(resolvers) on their stepping motor packages.
Resolvers are quite common in the higher end motion
control applications.

Steve

----------
From: Darrell <dgehlsen@...>
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Date: Sunday, July 02, 2000 12:08 AM

Stepper motors do not have resolvers. Some servo motors have resolvers.
That
driver is for running servos with step and direction signals.
Darrell

----- Original Message -----
From: Carey L. Culpepper <mr.c@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Saturday, July 01, 2000 7:20 PM
Subject: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive


> I have spent the whole day trying to get a Compumotor Plus drive to run
> a motor with step-direction inputs. I downloaded the manual and have
> gone through it several times. The drive has a computer on-board that
> sets everything. Everything is set through serial port commands
> including current rating and microstepping resolution. The problem is
> that the units are designed to be used with motors with built in
> resolvers.The manual specifies that it will not accept encoder input.If
> the motor gets a pulse, it is expected to turn a step. If it doesn't it
> keeps trying or gives an error message. It operates just like a servo
> motor and is tuned accordingly with a series of switches or through the
> RS232. I have gone through the manual several times trying to find a
> command that would let me run it without the resolver. All I found were
> commands to set the amount of allowable error. So, I shut it down and
> got my screwdriver and had a "look under the hood". Three PCB,s one with
> the computor circuitry,one small board with the display and tuning
> switches, and the power supply/driver board. I found three jumpers
> together on the computer PCB.
> My question is this: Is it possible to run these drives without the
> resolver input? Anyone familiar with these units. They are very
> sophisticated. I am impressed. If only I had motors with resolvers.
> These are made to be run closed loop.
>
>
> ------------------------------------------------------------------------
> Click for more information on how eGroups members save with beMANY!
> http://click.egroups.com/1/5074/4/_/423600/_/962504496/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>


------------------------------------------------------------------------
Lonely? Get Firetalk!
Free, unlimited calls anywhere in the world.
Free voice chat on hundreds of topics.
http://click.egroups.com/1/5477/4/_/423600/_/962521228/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@egroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
Moderator: jmelson@... [Moderator]
URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
FAQ: http://www.ktmarketing.com/faq.html
bill,
List Manager