Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive

This sounds like it may be a propriotry type resolver
made for that system. Contact Compumotor and find
out if a standard resolver is compatible. I think you are
going to find that this system is way be-yond your
needs, and patience.

Steve

----------
From: Carey L. Culpepper <mr.c@...>
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Date: Monday, July 03, 2000 3:09 PM

Ron: Thanks for your reply. Here is what the user manual has to say
about their resolver:
A brushless resolver made of the same rotor and stator components used
in the motor was developed. This resolver is magnetically similar to the
motor itself, and is manufactured as an integral part of the motor. The
result is a sensor with the same number of poles as the motor( which
makes control straightforward) that is always properly aligned with the
motor and can be operated in high noise, high temperature environments."

This is what led me to believe that a motor might be wired to do the
same thing.


------------------------------------------------------------------------
Free Worldwide Calling with Firetalk!
Click Here:
http://click.egroups.com/1/5481/4/_/423600/_/962662254/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@egroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
Moderator: jmelson@... [Moderator]
URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
FAQ: http://www.ktmarketing.com/faq.html
bill,
List Manager