Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Posted by
Carey L. Culpepper
on 2000-07-03 15:10:54 UTC
Ron: Thanks for your reply. Here is what the user manual has to say
about their resolver:
A brushless resolver made of the same rotor and stator components used
in the motor was developed. This resolver is magnetically similar to the
motor itself, and is manufactured as an integral part of the motor. The
result is a sensor with the same number of poles as the motor( which
makes control straightforward) that is always properly aligned with the
motor and can be operated in high noise, high temperature environments."
This is what led me to believe that a motor might be wired to do the
same thing.
about their resolver:
A brushless resolver made of the same rotor and stator components used
in the motor was developed. This resolver is magnetically similar to the
motor itself, and is manufactured as an integral part of the motor. The
result is a sensor with the same number of poles as the motor( which
makes control straightforward) that is always properly aligned with the
motor and can be operated in high noise, high temperature environments."
This is what led me to believe that a motor might be wired to do the
same thing.
Discussion Thread
Steve Carlisle
2000-07-01 19:43:32 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Carey L. Culpepper
2000-07-01 19:55:16 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Carey L. Culpepper
2000-07-01 20:07:56 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Darrell
2000-07-02 00:00:28 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Carey L. Culpepper
2000-07-02 05:17:53 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Steve Carlisle
2000-07-02 07:58:58 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Ron Wickersham
2000-07-03 14:29:59 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Carey L. Culpepper
2000-07-03 15:10:54 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
eric
2000-07-03 15:21:35 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Steve Carlisle
2000-07-03 16:07:28 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Steve Carlisle
2000-07-03 16:10:04 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Carey L. Culpepper
2000-07-03 16:28:29 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Jon Elson
2000-07-03 22:35:48 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive
Ron Wickersham
2000-07-05 03:59:57 UTC
Re: [CAD_CAM_EDM_DRO] Compumotor Plus stepper drive