RE: [CAD_CAM_EDM_DRO] Parts source Needed
Posted by
Dave Halliday
on 2006-02-06 21:40:23 UTC
Unnhh.. A "Horsepower" is like a "Watt". It is a unit of measurement
for mechanical power.
You will have greater torque but lower RPM's _at_that_torque_ -- ie:
same Horsepower minus mechanical losses.
I want to be able to take my interface box into the electronics area if
needed without cutting the cables to the motors. I used to do sound for
bands and know that the Speakons are pretty indestructible and have a
high power carrying capacity.
Dave
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
for mechanical power.
You will have greater torque but lower RPM's _at_that_torque_ -- ie:
same Horsepower minus mechanical losses.
I want to be able to take my interface box into the electronics area if
needed without cutting the cables to the motors. I used to do sound for
bands and know that the Speakons are pretty indestructible and have a
high power carrying capacity.
Dave
> -----Original Message-----http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of R Rogers
> Sent: Monday, February 06, 2006 6:40 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Parts source Needed
>
>
> I just wire all mine direct. 2 hp servos with 2.5:1 reduction
> = 5 hp at the lead screw. The last thing I need is a runaway.
>
> Ron
>
> Dave Halliday <dh@...> wrote:
> Those are the same kind that you can buy at Radio Shack.
> They are not
> the XLR connectors that were being asked about.
>
> The Radio Shack units were discussed earlier and found to be seriously
> wanting. Poor mechanical construction and no real current carrying
> capacity. An open invitation for glitches and intermittent problems.
>
> Dave
>
> > -----Original Message-----
> > From: CAD_CAM_EDM_DRO@yahoogroups.com
> > [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of R Rogers
> > Sent: Monday, February 06, 2006 4:13 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] Parts source Needed
> >
> >
> > Bill, try this one. I dont remember the price but, they were cheap.
> >
> >
> > http://www.workmanelectronics.com/htmdocs/c5bl.htm
> >
> > Ron
> >
> > wanliker@... wrote:
> >
> > In a message dated 2/6/2006 4:00:26 PM Mountain Standard Time,
> > rogersmach@... writes:
> >
> > There were some suppliers of these a while back in Ebay stores.
> >
> >
> >
> > Yes I did, but did not find any 4 pin types.
> > bill
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@...
> > davemucha@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > to be a sister site to the CCED group, as many of the same
> > members are there, for OT subjects, that are not allowed on
> > the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@...
> > davemucha@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on
> the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
wanliker@a...
2006-02-06 10:16:22 UTC
Parts source Needed
zeff1015@a...
2006-02-06 11:13:27 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
Dave Halliday
2006-02-06 11:23:39 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
R Rogers
2006-02-06 14:55:06 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
wanliker@a...
2006-02-06 15:05:13 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
R Rogers
2006-02-06 16:12:35 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
R Rogers
2006-02-06 16:19:06 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
Dave Halliday
2006-02-06 16:22:46 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
R Rogers
2006-02-06 18:40:47 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
Stephen Wille Padnos
2006-02-06 19:06:22 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
Dave Halliday
2006-02-06 21:40:23 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
Graham Stabler
2006-02-07 01:21:37 UTC
Re: Parts source Needed
R Rogers
2006-02-07 06:02:36 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
Jon Elson
2006-02-07 08:33:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Parts source Needed
turyga1963
2006-02-07 15:10:26 UTC
Re: Parts source Needed
Erie Patsellis
2006-02-10 19:23:09 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
Erie Patsellis
2006-02-10 19:23:54 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed
Andy Wander
2006-02-10 20:16:11 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
Dave Halliday
2006-02-10 20:32:39 UTC
RE: [CAD_CAM_EDM_DRO] Parts source Needed
wanliker@a...
2006-02-10 21:12:53 UTC
Parts source Needed
JanRwl@A...
2006-02-10 22:28:14 UTC
Re: [CAD_CAM_EDM_DRO] Parts source Needed