CAD CAM EDM DRO - Yahoo Group Archive

Re: Parts source Needed

on 2006-02-07 01:21:37 UTC
>
> I just wire all mine direct. 2 hp servos with 2.5:1 reduction = 5 hp
at the lead screw. The last thing I need is a runaway.
>
> Ron


Surely if you loose a connection the last thing it will be doing is
running away unless it is an encoder connection perhaps.

The only danger with connectors might be damage to the drives if one
is inadvertently disconnected or is intermittent and that is where
choosing the connectors and keeping the dog away from your control box
comes in.

Graham

Discussion Thread

wanliker@a... 2006-02-06 10:16:22 UTC Parts source Needed zeff1015@a... 2006-02-06 11:13:27 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed Dave Halliday 2006-02-06 11:23:39 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed R Rogers 2006-02-06 14:55:06 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed wanliker@a... 2006-02-06 15:05:13 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed R Rogers 2006-02-06 16:12:35 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed R Rogers 2006-02-06 16:19:06 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed Dave Halliday 2006-02-06 16:22:46 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed R Rogers 2006-02-06 18:40:47 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed Stephen Wille Padnos 2006-02-06 19:06:22 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed Dave Halliday 2006-02-06 21:40:23 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed Graham Stabler 2006-02-07 01:21:37 UTC Re: Parts source Needed R Rogers 2006-02-07 06:02:36 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed Jon Elson 2006-02-07 08:33:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Parts source Needed turyga1963 2006-02-07 15:10:26 UTC Re: Parts source Needed Erie Patsellis 2006-02-10 19:23:09 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed Erie Patsellis 2006-02-10 19:23:54 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed Andy Wander 2006-02-10 20:16:11 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed Dave Halliday 2006-02-10 20:32:39 UTC RE: [CAD_CAM_EDM_DRO] Parts source Needed wanliker@a... 2006-02-10 21:12:53 UTC Parts source Needed JanRwl@A... 2006-02-10 22:28:14 UTC Re: [CAD_CAM_EDM_DRO] Parts source Needed