Re: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
Posted by
BRIAN FOLEY
on 2006-02-13 09:16:53 UTC
also check to make sure the output when disabled is in the state it should
be. without looking in the book if you set all inputs low disabled the
outputs should be high, if not its shorted. if any of those chips output is
shorted it will not allow the circuit to operate properly. cul brian f.
be. without looking in the book if you set all inputs low disabled the
outputs should be high, if not its shorted. if any of those chips output is
shorted it will not allow the circuit to operate properly. cul brian f.
----- Original Message -----
From: "Alan Marconett" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, February 13, 2006 11:19 AM
Subject: RE: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
> HI Bruce,
>
> One more thing; similarly put two switches on the two active low enable
pins
> (1 & 19). Both must be CLOSED to take their pins low and ENABLE the
> tri-state buffer. The buffers are non-inverting; this means that when the
> input switch is closed (a low) the respective output will be low, and turn
> on it's LED.
>
> Alan KM6VV
>
>
> > > Hello,
> > >
> > > Hoping some elctronics wizard can help me with this.
> > > I have an Anilam M controler that is not working and would like to see
> > > if I can fix it before I try a retrofit
> > > So heres the question: can I bench test this IC? SN74LS541N, here is
> > > link to download the datasheet:
> > > http://www.datasheets.org.uk/download.php?article=2355104
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.6/258 - Release Date: 2/13/06
>
>
Discussion Thread
Bruce
2006-02-12 21:28:55 UTC
How do I test IC SN74LS541N on PCB?
Bob Muse
2006-02-12 22:07:02 UTC
Re: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
James Washer
2006-02-12 22:38:55 UTC
Re: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
Alan Marconett
2006-02-13 08:16:12 UTC
RE: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
Alan Marconett
2006-02-13 08:20:56 UTC
RE: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
BRIAN FOLEY
2006-02-13 09:16:53 UTC
Re: [CAD_CAM_EDM_DRO] How do I test IC SN74LS541N on PCB?
Bruce
2006-02-13 12:56:30 UTC
Re: How do I test IC SN74LS541N on PCB?
juan gelt
2006-02-13 13:53:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: How do I test IC SN74LS541N on PCB?
Roy J. Tellason
2006-02-14 10:13:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: How do I test IC SN74LS541N on PCB?
Mcginnis, Darrell S
2006-03-01 14:04:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: How do I test IC SN74LS541N on PCB?