CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] : Lathe solid model to G code

on 2006-03-24 09:05:06 UTC
HI Bill, John,

Funny, I never found that a problem. It "looks" like a lathe setup to me on
the screen. I just "transpose" the axis names in my head I guess.

All the options as to which side of the Z axis to draw and cut on, and just
how to convey to the program how big my initial stock was took me a while to
figure out. It's much less intuitive then the mill. I recommend starting
CNC on the mill.

I'm still wondering if there is a better way to approach the "shadowed" side
of contours, i.e. on the right side of a ring, for example.

Alan KM6VV

>
>
> In a message dated 3/23/2006 3:09:16 PM Mountain Standard Time,
> john@... writes:
>
> You can tell the poor ones when they insist you draw in X Y and not in X
> Z
> as a proper lathe program should be.
> They are no more than cut down mill programs with an axis missing.
>
>
>
> John, Absolutely Right,
>
> Even worse is drawing in Y that will be converted to X, drawing in X that
> will be converted to Z, DRO"S still in mill function.
> Somehow that just does not seem logical..............think any will ever
> change?????
>
> bill
>

Discussion Thread

wanliker@a... 2006-03-23 18:49:55 UTC : Lathe solid model to G code Alan Marconett 2006-03-24 09:05:06 UTC RE: [CAD_CAM_EDM_DRO] : Lathe solid model to G code wanliker@a... 2006-03-26 14:08:47 UTC : Lathe solid model to G code wanliker@a... 2006-03-26 14:13:56 UTC : Lathe solid model to G code R Rogers 2006-03-26 14:38:59 UTC Re: [CAD_CAM_EDM_DRO] : Lathe solid model to G code Dhiren Shah 2006-03-26 14:41:08 UTC RE: [CAD_CAM_EDM_DRO] : Lathe solid model to G code wanliker@a... 2006-03-26 14:53:54 UTC Re: [CAD_CAM_EDM_DRO] : Lathe solid model to G code Les Newell 2006-03-26 15:07:57 UTC Re: [CAD_CAM_EDM_DRO] : Lathe solid model to G code wanliker@a... 2006-03-26 15:15:02 UTC Re: [CAD_CAM_EDM_DRO] : Lathe solid model to G code Les Newell 2006-03-26 15:37:07 UTC Re: [CAD_CAM_EDM_DRO] : Lathe solid model to G code