Re: [CAD_CAM_EDM_DRO] VEXTA 5-phase stepper motor PK566-A-A25 & Driver DFU1514

Hi Weedy,

Sorry, the one I have is a UDX 5114 controller.

I have CW and CCW inputs. Not the same as step/dir!

Alan KM6VV


WT wrote:

> Hi, Alan.
>
> Thanks in advance for the effort.
>
> Meantime, can someone advise me if I should provide (presuming X-axis) the
> following to the stepper driver:
> 1) +5V DC to the CW+, Pin 2 (from parallel port) to CW-, and 0V DC to the
> parallel port ground; or
> 2) Pin 2 (from parallel port) to CW+, and parallel port ground to CW- (I
> have tried this option and it seems to work but I am not sure whether it is
> correct or not).
>
> Weedy
>
> ----- Original Message -----
> From: "Alan Marconett" <KM6VV@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, May 18, 2006 12:54 AM
> Subject: RE: [CAD_CAM_EDM_DRO] VEXTA 5-phase stepper motor PK566-A-A25 &
> Driver DFU1514
>
>
>
>>HI Weedy,
>>
>>I may have one. Let me check when I get back to the shop. I have a new
>>VEXTA 5-phase and driver of some model or another.
>>
>>Alan KM6VV
>>