Re: [CAD_CAM_EDM_DRO] VEXTA 5-phase stepper motor PK566-A-A25 & Driver DFU1514

Alan,

Thanks for checking.

My DFU1514 is very similar to your UDX5114, I believe. The difference is
DFU1514 accepts both 1P and 2P. Also, the input power is 110V AC.

What I really need to know is what current the DFU1514 can output, how to
set the current, the micro stepping, etc.

Weedy

----- Original Message -----
From: "Alan Marconett" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, May 18, 2006 10:09 AM
Subject: Re: [CAD_CAM_EDM_DRO] VEXTA 5-phase stepper motor PK566-A-A25 &
Driver DFU1514


> Hi Weedy,
>
> Sorry, the one I have is a UDX 5114 controller.
>
> I have CW and CCW inputs. Not the same as step/dir!
>
> Alan KM6VV
>
>
> WT wrote:
> > Hi, Alan.
> >
> > Thanks in advance for the effort.
> >
> > Meantime, can someone advise me if I should provide (presuming X-axis)
the
> > following to the stepper driver:
> > 1) +5V DC to the CW+, Pin 2 (from parallel port) to CW-, and 0V DC to
the
> > parallel port ground; or
> > 2) Pin 2 (from parallel port) to CW+, and parallel port ground to CW- (I
> > have tried this option and it seems to work but I am not sure whether it
is
> > correct or not).
> >
> > Weedy
> >
> > ----- Original Message -----
> > From: "Alan Marconett" <KM6VV@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Thursday, May 18, 2006 12:54 AM
> > Subject: RE: [CAD_CAM_EDM_DRO] VEXTA 5-phase stepper motor PK566-A-A25 &
> > Driver DFU1514
> >
> >
> >
> >>HI Weedy,
> >>
> >>I may have one. Let me check when I get back to the shop. I have a new
> >>VEXTA 5-phase and driver of some model or another.
> >>
> >>Alan KM6VV
> >>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>