CAD CAM EDM DRO - Yahoo Group Archive

Re: : linear bearing based on ground flat stock

Posted by Fred Smith
on 2006-05-23 09:22:38 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Graham Stabler" <eexgs@...>
wrote:
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@>
wrote:
>
> > V-track rail systems use opposing rollers. There is a preload
> > between the opposing rollers to prevent the roller from riding
up on
> > the sides of the rail angles. With a preload, there is little
or no
> > twisting of the trolley and it becomes very stable ( 4 total
rollers
> > and two parallel tracks). Connect two trolleys with a beam to
> > create a gantry, or use one alone for a hexapod strut.
> >
> > Fred Smith
>
>
> He was suggesting two rollers are enough.
>


Two won't work, but 3 will.

Fred Smith - IMService

Discussion Thread

wanliker@a... 2006-05-22 18:27:36 UTC : linear bearing based on ground flat stock wanliker@a... 2006-05-22 20:41:43 UTC : linear bearing based on ground flat stock Graham Stabler 2006-05-23 02:59:02 UTC Re: : linear bearing based on ground flat stock Fred Smith 2006-05-23 07:27:40 UTC Re: : linear bearing based on ground flat stock Graham Stabler 2006-05-23 07:52:48 UTC Re: : linear bearing based on ground flat stock Fred Smith 2006-05-23 09:22:38 UTC Re: : linear bearing based on ground flat stock turbulatordude 2006-05-23 10:39:17 UTC Re: : linear bearing based on ground flat stock wanliker@a... 2006-05-24 23:58:44 UTC : linear bearing based on ground flat stock Jack Hudler 2006-05-25 09:17:28 UTC BOO! lcdpublishing 2006-05-25 11:34:22 UTC Re: BOO! Dave Fisher 2006-05-25 11:55:36 UTC RE: [CAD_CAM_EDM_DRO] Re: BOO! lcdpublishing 2006-05-25 12:43:52 UTC Re: BOO! Ron Yost 2006-05-25 14:23:08 UTC Speedy router video URL .. was:RE: [CAD_CAM_EDM_DRO] Re: BOO!