CAD CAM EDM DRO - Yahoo Group Archive

Re: VFD single phase 5hp

Posted by paultitchener
on 2006-06-21 20:55:59 UTC
I'm pretty sure that here - www.dealerselectric.com -
they sell 5HP Teco VFD's that will run from single phase power.

If don't plan to push the machine hard, I've seen it suggested that
you can run a 5HP motor on a 3HP VFD. To do this you need to set the
acceleration and decelleration paramters a little slower than you
would with a 5HP VFD, but if you are not in a hurry and don't plan to
push the machine to the max it should work.

Paul T.

Discussion Thread

Callcbm 2006-06-21 18:07:40 UTC VFD single phase 5hp vavaroutsos 2006-06-21 19:29:16 UTC Re: VFD single phase 5hp paultitchener 2006-06-21 20:55:59 UTC Re: VFD single phase 5hp Jon Elson 2006-06-21 20:58:47 UTC Re: [CAD_CAM_EDM_DRO] VFD single phase 5hp David Speck 2006-06-21 21:18:58 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD single phase 5hp Jeff Goldberg 2006-06-22 03:30:05 UTC [CAD_CAM_EDM_DRO] VFD single phase 5hp turbulatordude 2006-06-22 04:49:18 UTC Re: VFD single phase 5hp Al Daniel 2006-06-22 08:14:17 UTC Re: VFD single phase 5hp Jon Elson 2006-06-22 10:15:16 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD single phase 5hp