Re: [CAD_CAM_EDM_DRO] Advice on small mill table conversion

----- Original Message -----
From: "Ken Campbell" <deltainc@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, July 07, 2006 8:01 PM
Subject: Re: [CAD_CAM_EDM_DRO] Advice on small mill table conversion


> I would like to hear any comments on this " plastic follower nut " useage
>
> .. oh, I might mention that we have a fair amount of falloff from our
> lathes; mostly 1 inch, natural ( white) round; if anyone is interested,
> we ask 30 cents per inch, plus $3 shipping. falloffs are about 3 to 4
> inches in lengths; it makes the neatest self sealing bolts, and slickest
> balls etc.
> regards, ken campbell, www.deltainc-usa.com

**********
Thanks for the interest in the surplus delrin falloffs, guys.... I made an
error tho ... the price is $0.30 per FOOT of falloff, not per inch. + $3 to
ship .
$3/ft is about the going rate for new stuff. sorry about that.
Somebody asked me about machining delrin... it machines extremely nice,
cleans up easy, needs to be about no more than 2 diameters from collet,
drills pretty true to the drill bit. keep the heat in the chip, make big,
slow chips, we machine dry.
hope this helps,ken at delta.



--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.10/383 - Release Date: 7/7/2006