Re: Camera Software
Posted by
Graham Stabler
on 2006-08-01 02:59:20 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Neil Gillies <neil@...> wrote:
you have decent reference objects that will help a great deal. Also
for larger objects you will need to have plenty of pixels, it might be
better to use a digital stills camera where you can get 5 mega pixels
for very little cash. Don't be afraid to whip off the origional
optics to reveal the array, as long as it has a manual mode it
*probably* won't care.
If you want live measurement then that is different again.
Graham
>Picking up on what Neil has said about correcting distortion etc, if
> Hi Dennis
>
> The semiconductor world is full of this stuff - on a small scale of
> course but the technology is the same.
>
> Here's a link to probably one of the best systems ...
>
> http://www.muetec.com/products/wafer/muetec-100.php
>
> Don't get too anal about lens distortion, it's amazing what some
> simple algorithms can correct for and
> the accuracy that can be achieved is absolutely mindboggling.
> Oh - and an encoder isn't needed either for short measurements :-))))
>
> Have fun
>
> Neil
>
you have decent reference objects that will help a great deal. Also
for larger objects you will need to have plenty of pixels, it might be
better to use a digital stills camera where you can get 5 mega pixels
for very little cash. Don't be afraid to whip off the origional
optics to reveal the array, as long as it has a manual mode it
*probably* won't care.
If you want live measurement then that is different again.
Graham
Discussion Thread
Neil Gillies
2006-08-01 01:08:29 UTC
Re: Camera Software
Graham Stabler
2006-08-01 02:59:20 UTC
Re: Camera Software
Stephen Wille Padnos
2006-08-01 06:31:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Camera Software
jesse Brennan
2006-08-01 06:40:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Camera Software
Graham Stabler
2006-08-01 07:50:23 UTC
Re: Camera Software
Stephen Wille Padnos
2006-08-01 07:57:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Camera Software
Graham Stabler
2006-08-01 07:59:39 UTC
Re: Camera Software
ED MAISEY
2006-08-01 14:00:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Camera Software
Sebastien Bailard - Dubsen
2006-08-02 00:10:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Camera Software
Dennis Schmitz
2006-08-02 13:02:40 UTC
Re: Camera Software