RE: [CAD_CAM_EDM_DRO] Re: Rackmounts for CNC Systems

Of course, you mean "modify the DE9 cutouts to fit the DA15
connectors.....".

Right? :)

________________________________________
Andy Wander

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Alan Marconett
Sent: Tuesday, August 01, 2006 11:49 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Rackmounts for CNC Systems

Hi Ballendo,

That comes close. I'd need to modify the DB9 cutouts to fit DB15
connectors
that I use for my cable system.

Is the top open? I'm not sure I understand the "drive bay". Disk
drive?

Is the side opposite the DB cutouts blank? Is that the "front"?

Sorry for all the questions, perhaps you could post (or send me) a few
more
pix for it.

I intend to do a linear supply with 4 EAS driver boards, an opto board,
and
a USB-CNC (PIC) "pulse generator" board. Small control xfmr for the
boards.
That should just about fit.

Yes, that could do it! Two please!


Alan KM6VV

>
> >In CCED, "Alan Marconett" <KM6VV@...> wrote:
> >I'm currently looking for a convenient enclosure for my next

Driver/PS

> >box. This one is likely to be an external drive enclosure for a 5.25"
> >hard drive, unless I can find something better for less than $50.
> >Suggestions?
>
> Alan,
>
> Here's one:
>
> http://www.cncresource.com/store/index.php?
> main_page=product_info&cPath=13&products_id=12
>
> There are 6 holes for DE9's (motor axes) 2 DB25's (pport inputs), a 3-
> 1/2" drive bay, w/door (Could mount a squirrel cage style fan here)
>
> A fuse holder/ power cord cutout, and a small military grade connector
> screw on type with multi-pins; check out the pic (for an MPG?)
>
> NEMA style steel white painted backplate included Heavy steel welded
> construction, strong and big enough for a linear power supply with a
> 320W toroid and the 47K cap (also at the site-in stock), with room

left

> over for a xylotex or Geckos or HCNC board. (I once put a 3 axis 5A
> Camtronics-- Kevin Carrol's board--in one, but it was tight fit.
>
> Had to use a hole saw back then to fit a big fan...
>
> There are about 40 IN stock for immediate shipping...
>
> Ballendo

<snip>



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links








This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex