Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Posted by
Marshall Pharoah
on 2000-07-12 10:28:56 UTC
It might be simpler to set up the Linux box as a FTP server,
and just use the NT FTP client to transfer files. This would
assume that both machines were set up with TCP/IP and could
ping each other. Samba would be useful to provide DOS directory
and print services, but for just transferring files FTP would work.
Marshall
and just use the NT FTP client to transfer files. This would
assume that both machines were set up with TCP/IP and could
ping each other. Samba would be useful to provide DOS directory
and print services, but for just transferring files FTP would work.
Marshall
----- Original Message -----
From: eric <eek105@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Wednesday, July 12, 2000 12:08 PM
Subject: Re: [CAD_CAM_EDM_DRO] ZIP in DOS
> johndroc@... wrote:
>
> > Ok, I know this digresses from the purpose of the list, but it does
> > have some
> > relevance. In 10 lines or less, can you outline the procedure for
> > networking
> > an EMC (Linux) machine to a WinNT machine? This would be handy for
> > transferring CAM/G-Code files, etc. Thanks.
> >
>
> If you want your linux machine to look like a winnt machine you have to
> use samba. Actually, my
> labmate is the one who sets up the samba shares. We are too lazy to get
> a samba client working on
> linux, so we do the work from the NT machine. With samba running on
> linux, the linux boxes look just
> like win boxes to the win boxes.
>
> Networking itself is pretty easy. What you do is set up TCP/IP on all
> the machines. 192.168.1.xxx is a
> good address starting point for a private network. Just give each
> machine a different ip address.
>
> The place to look is at the samba howto at www.linuxdoc.org
> eric
>
>
>
>
Discussion Thread
eric
2000-07-11 09:37:55 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Mike Rainone
2000-07-11 10:49:04 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Ian Wright
2000-07-11 16:08:46 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Ian Wright
2000-07-11 16:08:48 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
johndroc@a...
2000-07-12 07:17:09 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
eric
2000-07-12 09:00:24 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Marshall Pharoah
2000-07-12 10:28:56 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Ian Wright
2000-07-12 13:13:56 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Ian Wright
2000-07-12 13:13:58 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Marshall Pharoah
2000-07-13 04:32:07 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS
Ian Wright
2000-07-14 01:55:01 UTC
Re: [CAD_CAM_EDM_DRO] ZIP in DOS