Re: [CAD_CAM_EDM_DRO] encoder wiring

Hmmm the encoder looks sort of like the Renco
http://www.renco.com/106030.htm

Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch

----- Original Message -----
From: <cnc002@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, September 16, 2006 12:43 PM
Subject: Re: [CAD_CAM_EDM_DRO] encoder wiring


>
> In a message dated 9/16/2006 3:35:38 P.M. Eastern Daylight Time,
> rocketscientistnate@... writes:
>
> I can't seem to get any response from centroid. Is there any kind of
> tests I can do to figure out the wiring of this motor/encoder? All I
> can see is 3 heavy wires (such as for power) on one plug, and nine
> light ones on the other. They had a prewire kit that seems to have a
> 9 pin d-connector on the end. Is this a universal wiring scheme for
> quarature encoders? would that be wired for my rutex driver or only
> centroids drivers?
>
> Thanks
> Nathan
>
>
>
> The larger wires would be for power to the motor I am sure. The pin-out
> for
> the encoder is not always uniform from one manufacturer to the other and
> neither are the configuration of the connectors. Can you E-mail me all
> of the
> information off of the encoder and motor. I may have some sources that
> can
> help with that.
>
> Randy
>
>
>
> Randy Abernathy
> 4626 Old Stilesboro Road NW
> Acworth, GA 30101-4066
> E-mail: cnc002@...
>
> I furnish technical support, repair, and other related services for your
> industrial woodworking machinery. My background as Senior Service
> Engineer for
> the SCMI Group for nearly fifteen years with factory training, combines
> with
> my extensive background in electronics, mechanics, pneumatics, electrical
> and
> CNC machinery to offer you needed support for your machinery. Services
> include but are not limited to the following:
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>