CAD CAM EDM DRO - Yahoo Group Archive

limit switches

on 2006-10-10 10:50:27 UTC
Anyone have a source for some good limit switches that are reasonably priced. I've been having problems with the 2 types of micro switches that I've had so far. I run them normally closed and vibration from the machine intermittently bumps them open and faults my geckos and wrecks my part. I've been just running with the switches disconnected and all works well. I found that if I wrap the machine with a screwdriver handle near the switches this creates the fault a lot of the time.

Thanks

[Non-text portions of this message have been removed]

Discussion Thread

edwardhall@a... 2001-05-29 23:41:14 UTC limit switches Alan Marconett KM6VV 2001-05-30 10:48:18 UTC Re: [CAD_CAM_EDM_DRO] limit switches callum002c 2003-10-23 07:49:53 UTC limit switches Harvey White 2003-10-23 09:22:58 UTC Re: [CAD_CAM_EDM_DRO] limit switches Robert Campbell 2003-10-23 11:09:10 UTC Re: [CAD_CAM_EDM_DRO] limit switches Tim Goldstein 2003-10-24 16:53:03 UTC CCED message database Mike Fredricks 2006-10-10 10:50:27 UTC limit switches jesse Brennan 2006-10-10 12:28:00 UTC Re: [CAD_CAM_EDM_DRO] limit switches figNoggle 2006-10-10 14:26:45 UTC Re: [CAD_CAM_EDM_DRO] limit switches cnc002@a... 2006-10-10 16:46:01 UTC Re: [CAD_CAM_EDM_DRO] limit switches Jon Elson 2006-10-10 18:22:34 UTC Re: [CAD_CAM_EDM_DRO] limit switches Paul Kelly 2006-10-10 19:16:22 UTC RE: [CAD_CAM_EDM_DRO] limit switches Robert Colin Campbell 2006-10-10 19:26:59 UTC Re: [CAD_CAM_EDM_DRO] limit switches ED MAISEY 2006-10-10 20:22:49 UTC Re: [CAD_CAM_EDM_DRO] limit switches cnc002@a... 2006-10-11 14:36:17 UTC Re: [CAD_CAM_EDM_DRO] limit switches Mike Fredricks 2006-10-12 11:27:30 UTC Re: limit switches cnc002@a... 2006-10-12 13:08:06 UTC Re: [CAD_CAM_EDM_DRO] Re: limit switches Mike Fredricks 2006-10-13 20:39:09 UTC Re: limit switches