CAD CAM EDM DRO - Yahoo Group Archive

Re: 3D plasma/water-jet cutting

Posted by Tom Foley
on 2006-10-26 11:59:09 UTC
Seiman,
Thanks for the input. I know more about plasma cutting than water
jet and thought the surface might crreate a problem for the torch.

I hadn't thought of the fourth axis to tip the torch to keep it
normal to the surface. I could easily grind the opening to
compensate for the angle.

Tom

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Seiman H <seiman_h@...> wrote:
>
> hi tom.
>
> you have to have specific distance for plasma to cut somthing as
the torch it is not the right solution for 3D, but for water jet yes
3D might work only to cut 30 to 90 degree shape by turning the Z axis
front back right left.
>
> the question is the software that can control the 4 side of Z
axis movement
>
> Seiman
>
>
>
> Tom Foley <tpf_ski93@...> wrote:
> Hi,
>
> I'm interested in plasma and/or water jet cutting on curved
surfaces.
> The shape (mostly circles) would be controlled by the XY plane and
the
> torch/nozzle normal to the XY plane (sort of a saddle-cut).
>
> Has anyone tried this?
>
> Can I control the torch to work distance accurately enough?
>
> Does the plasma torch need to be so close to the work that the
surface
> curvature will interfere with it?
>
> Any ideas would be appreciated.
>
> Tom
>
>
>
>
>
>
> ---------------------------------
> The best gets better. See why everyone is raving about the All-new
Yahoo! Mail.
>
> [Non-text portions of this message have been removed]
>

Discussion Thread

Tom Foley 2006-10-26 05:30:43 UTC 3D plasma/water-jet cutting Seiman H 2006-10-26 09:15:47 UTC Re: [CAD_CAM_EDM_DRO] 3D plasma/water-jet cutting JCullins 2006-10-26 09:38:36 UTC Re: [CAD_CAM_EDM_DRO] 3D plasma/water-jet cutting caudlet 2006-10-26 11:28:21 UTC Re: 3D plasma/water-jet cutting Tom Foley 2006-10-26 11:59:09 UTC Re: 3D plasma/water-jet cutting Tom Foley 2006-10-26 12:27:02 UTC Re: 3D plasma/water-jet cutting turbulatordude 2006-10-30 05:58:46 UTC Re: 3D plasma/water-jet cutting jerry stout 2006-10-31 05:06:06 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D plasma/water-jet cutting turbulatordude 2006-10-31 07:32:26 UTC Re: 3D plasma/water-jet cutting jerry stout 2006-10-31 17:01:08 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D plasma/water-jet cutting Tom Foley 2006-10-31 18:43:35 UTC Re: 3D plasma/water-jet cutting Tom Foley 2006-10-31 19:25:52 UTC Re: 3D plasma/water-jet cutting bobmcknight@c... 2006-10-31 19:44:13 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D plasma/water-jet cutting Fred Smith 2006-11-01 01:47:00 UTC Re: 3D plasma/water-jet cutting