CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches

Posted by Ian Wright
on 2000-07-22 13:31:39 UTC
Hi Alan,

I'm not familiar with these mills but I'll see if there are any pictures on
the web and give it some thought.

Ian

--
Ian W. Wright
Sheffield UK


----- Original Message -----
From: Alan Marconett KM6VV <KM6VV@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: 22 July 2000 18:53
Subject: Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches


> Hi Ian,
>
> Fine, you figure out where to put the sensors (on a Sherline/Sears Mill
> for me), and I'll be working out the electronics for the MAXNC
> stepper/driver kit. Should also work on other stepper retrofits.
>

Discussion Thread

Jon Anderson 2000-07-21 14:15:25 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Darrell 2000-07-21 14:22:15 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Jon Elson 2000-07-21 16:23:59 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Alan Marconett KM6VV 2000-07-21 18:36:45 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Ian Wright 2000-07-22 06:05:49 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Alan Marconett KM6VV 2000-07-22 10:54:03 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Ian Wright 2000-07-22 13:31:39 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches psp@p... 2000-07-24 05:37:55 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches Alan Marconett KM6VV 2000-07-24 10:15:59 UTC Re: [CAD_CAM_EDM_DRO] Repeatability of microswitches