Re: Boss 5, Run Quill too High ... Now it is stuck????
Posted by
Polaraligned
on 2007-04-16 19:41:01 UTC
This has happened to me several times. Seems they really like
to jamb up at the top end of travel.
What I did was to take a large flat blade screwdriver and gently
tap the ballscrew pulley to loosen it. You need to reach in
to the housing to get the pulley.
I am pretty sure that you want to turn it clockwise looking at
the pulley from underneath the quill.
Scott
to jamb up at the top end of travel.
What I did was to take a large flat blade screwdriver and gently
tap the ballscrew pulley to loosen it. You need to reach in
to the housing to get the pulley.
I am pretty sure that you want to turn it clockwise looking at
the pulley from underneath the quill.
Scott
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Luke1027 <luke1027@...> wrote:
>
> Hello,
>
> I have a Boss5 and I took the Quill to high and now I cannot
> move it back down. How do I get this quill back down and
> working correctly once again?
>
> Thanks for any help here,
>
> Pete W.
>
Discussion Thread
Polaraligned
2007-04-16 16:04:27 UTC
Need ballscrew support Bearings.
R Rogers
2007-04-16 16:26:05 UTC
Re: [CAD_CAM_EDM_DRO] Need ballscrew support Bearings.
Polaraligned
2007-04-16 16:53:04 UTC
Re: Need ballscrew support Bearings.
ballendo
2007-04-16 17:28:46 UTC
Re: Need ballscrew support Bearings.
Polaraligned
2007-04-16 17:39:20 UTC
Re: Need ballscrew support Bearings.
Luke1027
2007-04-16 19:21:23 UTC
[CAD_CAM_EDM_DRO] Boss 5, Run Quill too High ... Now it is stuck????
Polaraligned
2007-04-16 19:41:01 UTC
Re: Boss 5, Run Quill too High ... Now it is stuck????
robert williams
2007-04-16 20:24:23 UTC
Re: [CAD_CAM_EDM_DRO] Boss 5, Run Quill too High ... Now it is stuck????
Peter Reilley
2007-04-16 20:37:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Boss 5, Run Quill too High ... Now it is stuck????
Luke1027
2007-04-17 05:25:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Boss 5, Run Quill too High ... Now it is stuck????
Polaraligned
2007-04-17 07:36:20 UTC
Re: Need ballscrew support Bearings.
R Rogers
2007-04-17 07:57:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need ballscrew support Bearings.
Jon Elson
2007-04-17 09:47:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need ballscrew support Bearings.
Polaraligned
2007-04-18 15:51:15 UTC
Re: Need ballscrew support Bearings.
Jon Elson
2007-04-18 19:23:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need ballscrew support Bearings.
Mark Vaughan
2007-04-19 02:17:46 UTC
RE: [CAD_CAM_EDM_DRO] Re: Need ballscrew support Bearings.
Mark Vaughan
2007-04-19 02:18:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: Need ballscrew support Bearings.