CAD CAM EDM DRO - Yahoo Group Archive

Re: AC servos

on 2007-07-06 03:18:25 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@...> wrote:
>

> Sure, these are really Yaskawa motors and drives, judging by the
> model numbers.

Correct, it even mentions Yaskawa on the labels.

> Or, you can use step generation hardware to produce the step
> rate you need. The performance of these drives is somewhere
> between awesome and frightening! I had one accelerating to 3000
> RPM and stopping within a single revolution!

So something a long the lines of a G-rex will be needed, and limit
switches!

Thanks for the advice!

Graham

Discussion Thread

Graham Stabler 2007-07-05 16:33:43 UTC AC servos Jon Elson 2007-07-05 18:29:40 UTC Re: [CAD_CAM_EDM_DRO] AC servos Mark Vaughan 2007-07-05 23:45:38 UTC RE: [CAD_CAM_EDM_DRO] AC servos Graham Stabler 2007-07-06 03:13:39 UTC Re: AC servos Graham Stabler 2007-07-06 03:18:25 UTC Re: AC servos vavaroutsos 2007-07-06 06:49:00 UTC Re: AC servos Mark Vaughan 2007-07-06 09:01:43 UTC RE: [CAD_CAM_EDM_DRO] Re: AC servos Graham Stabler 2007-07-06 11:25:19 UTC Re: AC servos Graham Stabler 2007-07-06 11:26:57 UTC Re: AC servos Mark Vaughan 2007-07-06 12:09:58 UTC RE: [CAD_CAM_EDM_DRO] Re: AC servos Jon Elson 2007-07-06 12:42:27 UTC Re: [CAD_CAM_EDM_DRO] AC servos Jon Elson 2007-07-06 12:44:35 UTC Re: [CAD_CAM_EDM_DRO] Re: AC servos Abby Katt 2007-07-06 13:09:57 UTC Optical encoder parallel port hookup? Mark Vaughan 2007-07-06 14:24:48 UTC RE: [CAD_CAM_EDM_DRO] AC servos caudlet 2007-07-06 15:16:52 UTC Re: Optical encoder parallel port hookup? Jon Elson 2007-07-06 15:57:52 UTC Re: [CAD_CAM_EDM_DRO] AC servos Graham Stabler 2007-07-07 04:44:24 UTC Re: AC servos Jon Elson 2007-07-07 16:03:28 UTC Re: [CAD_CAM_EDM_DRO] Re: AC servos Graham Stabler 2007-07-27 16:27:41 UTC Re: AC servos