CAD CAM EDM DRO - Yahoo Group Archive

Spindle motors

on 2007-08-28 19:11:26 UTC
High speed spindles tend to be heavy and hard to program.

The RC fraternity has some new "inrunner" (faster) and "outrunner"
(more torque) RC motors which seem to help reduce this mass (which
reduces the gantry loads which...)

The controllers are like the one at
http://www.align.com.tw/html/en/assembly/rce-bl75ge.htm which is a 54
Gram controller which handles 1.8 KW (over 2 HP!) up to 190,000
RPM. Of course there are bigger ones up to 125 Amps continuous...
http://www.castlecreations.com/products/phoenix-125.html

Now the motors are not quite as good, but this one appears to be good
to 12,000 RPM and almost 2 HP continuous but weights less than a
pound, 2" in diameter, 2 1/2" long. These DO require external
cooling, on a model aircraft prop wash cools them.

Or this one
http://www.rctoys.com/rc-toys-and-parts/NM-1509-25F/RC-PARTS-BRUSHLESS-MOTORS-NEUMOTORS.html
which is over 1 HP and rated for 60,000 RPM continuous.

Make the spindle light and the gantry gets lighter and the slew is
faster and...

David G. LeVine
Nashua, NH 03060

Discussion Thread

ccosentino2001 2007-08-28 16:58:57 UTC siemens program repeat David G. LeVine 2007-08-28 19:11:26 UTC Spindle motors Michael Fagan 2007-08-28 19:32:30 UTC Re: [CAD_CAM_EDM_DRO] Spindle motors David G. LeVine 2007-08-28 19:43:33 UTC Re: [CAD_CAM_EDM_DRO] Spindle motors caudlet 2007-08-29 06:00:13 UTC Re: Spindle motors R Rogers 2007-08-29 07:28:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors Stephen Wille Padnos 2007-08-29 07:42:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors David G. LeVine 2007-08-29 07:55:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors Hugh Prescott 2007-08-29 09:11:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors Jon Elson 2007-08-29 09:42:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors William Perun Sr 2007-08-29 18:08:57 UTC Re: Spindle motors Michael Fagan 2007-08-29 18:16:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors David G. LeVine 2007-08-29 19:33:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors David G. LeVine 2007-08-29 19:34:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors Graham Stabler 2007-08-30 00:55:45 UTC Re: Spindle motors Hugh Prescott 2007-08-30 07:45:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle motors