Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Posted by
Jon Elson
on 2007-10-11 09:26:15 UTC
Tom Hubin wrote:
entirely in metric units recently, with the encoder counts/mm as
the INPUT_SCALE in the ini file, and it all worked fine, once I
got used to the right range of values. I agree, EMC1 had some
problems with metric user units.
Jon
> Hello Thomas,I'm pretty sure this has all been fixed. I set up a machine
>
> Have you tried a different computer? No matter if it is a desktop or
> laptop. Just to see if the problem is unique to your particular computer
> or its setup.
>
> I don't use the jog functions for continous movement. I only jog in
> fixed increments. This gives me some repeatability so that I can use an
> edge finder with very high precision.
>
> So, try incremental mode jogging in small and large increments.
>
> My mill is metric but I seldom use metric distances for CNC. In earlier
> versions I found that operations in metric mode malfunctioned more often
> than in imperial mode. I think that the testing was not as thorough in
> metric mode so more bugs got through.
entirely in metric units recently, with the encoder counts/mm as
the INPUT_SCALE in the ini file, and it all worked fine, once I
got used to the right range of values. I agree, EMC1 had some
problems with metric user units.
Jon
Discussion Thread
bear_cnc
2007-10-02 14:18:33 UTC
Help please: Stuttering Stepper Motors in Jog Mode
R Rogers
2007-10-02 14:29:05 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Tom Hubin
2007-10-02 15:11:48 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Thomas Allgeier
2007-10-03 00:25:42 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Tom Hubin
2007-10-10 23:06:21 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Jon Elson
2007-10-11 09:26:15 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Stephen Wille Padnos
2007-10-11 09:38:31 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Tom Hubin
2007-10-11 13:16:00 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Jon Elson
2007-10-11 18:05:36 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Paul Kelly
2007-10-11 18:35:34 UTC
RE: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Jon Elson
2007-10-11 23:21:41 UTC
Re: [CAD_CAM_EDM_DRO] Help please: Stuttering Stepper Motors in Jog Mode
Graham Stabler
2007-10-12 03:01:47 UTC
Re: Help please: Stuttering Stepper Motors in Jog Mode
turbulatordude
2007-10-12 07:13:51 UTC
Re: now ELS on T-CNC
Paul Kelly
2007-10-12 15:40:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
victorf57
2007-10-13 10:20:36 UTC
Re: now ELS on T-CNC
Paul Kelly
2007-10-13 15:14:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
wanliker@a...
2007-10-13 18:19:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
R Rogers
2007-10-13 22:15:25 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
Paul Kelly
2007-10-13 22:45:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
R Rogers
2007-10-14 08:03:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
turbulatordude
2007-10-14 11:47:34 UTC
Re: now ELS on T-CNC
Paul Kelly
2007-10-14 15:45:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
Paul Kelly
2007-10-14 15:49:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC
turbulatordude
2007-10-14 19:06:42 UTC
Re: now ELS on T-CNC
John Dammeyer
2007-10-15 14:37:18 UTC
Stepper Motor usage.