RE: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC

At the risk of getting kicked off this list too. You don't want an ELS. I
built this one for a mate for the only reason I can think of to do it. He
was (his words) "Too old to figure out the gears". Seriously, all the other
reasons for implementing an ELS boil down to: "I'm intimidated by the
apparent complexity of the whole CNC thing". I've built two ELS's one
software, one hardware. They are not cheaper than CNC. You need to go
through the same setup/tuning process. To express it in terms that may be
more familiar to this lists membership. It's a bit like the perennial. "I've
got a new linear bearing design that costs nothing and uses skate bearings;
it's just as good as a THK linear bearing". Well (and I base this on having
implemented a couple and seen them in use for about a year now) and ELS just
doesn't offer any advantages over CNC..

I realise however that there are a whole bunch of people who are looking at
their skate bearing routers and calling me crazy, so I'll grab the latest
version of the ELS code from my old buddies machine next time I see him and
post it somewhere.

PK

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of victorf57
Sent: Sunday, 14 October 2007 1:21 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: now ELS on T-CNC

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@...> wrote:

>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Paul Kelly" <tech@> wrote:
> >
> > I turn tapered threads with turbocnc at 700-1000RPM.
> > See:
> > http://video.google.com.au/videoplay?docid=-3207102266117280799
> >
> > I've built an ELS on TCNC by modifying the screens and it runs on

$100

> > hardware..
> >
> > PK
>
> Is a copy of this available ?
>
> Dave
>

I would also be interested in seeing it.
I don;t have my lathe cnc'ed yet but I'm looking at options.
Victor



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links