CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC2 Screw Cutting Problem

Posted by mart_wid
on 2008-05-22 14:49:33 UTC
Steve.
I think you're right about the 1 ppr not being seen when it comes to
cutting threads. What is strange is that both encoder signals can be
viewed in Halscope and both waveforms look good to me. I think this
must be a bug somewhere in EMC2 - perhaps the config wizard, as the
first configuration you gave me got things working in a fashion - in
fact I could use that config if I could stop the Z axis surging
whilst threading. Thanks again, Martin.



-- In CAD_CAM_EDM_DRO@yahoogroups.com, Stephen Wille Padnos
<spadnos@...> wrote:
>
> It sounds like the 1PPR input isn't connected to the encoder
counter.
> Make sure that the 1PPR input is selected as "Spindle Index" in
> stepconf. The other possibility is that if the spindle speed is
too
> high, then the index input could be missed. I don't think that's
the
> problem though, if it looks like the spindle-position signal tracks
the
> physical spindle rotation.
>
> - Steve

Discussion Thread

mart_wid 2008-05-21 06:13:36 UTC EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-21 07:13:29 UTC Re: [CAD_CAM_EDM_DRO] EMC2 Screw Cutting Problem mart_wid 2008-05-21 14:42:33 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-21 15:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-22 03:34:20 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-22 11:15:08 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-22 13:32:53 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-22 13:40:15 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-22 14:49:33 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-22 15:12:52 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-23 10:31:58 UTC Re: EMC2 Screw Cutting Problem mart_wid 2008-05-23 10:59:54 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-23 12:27:36 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-23 14:25:17 UTC Re: EMC2 Screw Cutting Problem Stephen Wille Padnos 2008-05-24 07:47:21 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC2 Screw Cutting Problem mart_wid 2008-05-24 10:24:43 UTC Re: EMC2 Screw Cutting Problem