Re: [CAD_CAM_EDM_DRO] Re: Best 2.5D cad/cam solution under $300

On Sat, 19 Jul 2008 22:21:09 -0000, you wrote:

>For example, I use mach3 and could never use the mach3
>postprocessor as it create g-code not compatible with mach3. However
>the Master5 postprocessor works very well with mach3, try it if you
>also encounter problems with the mach 3 postprocessor.

There shouldn't be anything wrong with the Mach3 post processor, perhaps
you have a bad copy?

There are working post processors in both the Mach3 and Dolphin Cadcam
yahoo group files you can download. If you still think there's a problem
post your findings in either the Mach or Dolphin groups.

Thanks

Steve Blackmore
--