Re: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck

On Fri, 17 Oct 2008 19:10:07 -0400, you wrote:

>I'm pretty sure the design of the Albrecht won't let you drill a hole thru it.

>What about drilling and tapping the stub of the broken JT adapter? If you drill all the way thru it, and tap it, and then turn a screw in until it bottoms out, it will force the stub out of thetaper.

No need - if you strip it down, there is a threaded part down the
center, remove that, and you can then put a drift down and punch the
stub out.

There's a drawing here that shows how

http://www.albrechtchucks.com/replacement_template.cfm?subheader=category_replacement


Steve Blackmore
--