RE: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
Posted by
Chuck Merja
on 2008-10-18 02:24:24 UTC
BINGO! Thanks for all the answers, but especially this one!! Chuck
_____
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Steve Blackmore
Sent: Friday, October 17, 2008 6:00 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
_____
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Steve Blackmore
Sent: Friday, October 17, 2008 6:00 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
On Fri, 17 Oct 2008 19:10:07 -0400, you wrote:
>I'm pretty sure the design of the Albrecht won't let you drill a hole thru
it.
>What about drilling and tapping the stub of the broken JT adapter? If you
drill all the way thru it, and tap it, and then turn a screw in until it
bottoms out, it will force the stub out of thetaper.
No need - if you strip it down, there is a threaded part down the
center, remove that, and you can then put a drift down and punch the
stub out.
There's a drawing here that shows how
http://www.albrecht
<http://www.albrechtchucks.com/replacement_template.cfm?subheader=category_r
eplacement>
chucks.com/replacement_template.cfm?subheader=category_replacement
Steve Blackmore
--
[Non-text portions of this message have been removed]
Discussion Thread
ebiz_59
2008-10-17 14:50:27 UTC
Slightly OT broken JT in chuck
Leslie Newell
2008-10-17 15:00:43 UTC
Re: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
Andy Wander
2008-10-17 16:11:57 UTC
RE: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
Steve Blackmore
2008-10-17 16:59:52 UTC
Re: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck
Chuck Merja
2008-10-18 02:24:24 UTC
RE: [CAD_CAM_EDM_DRO] Slightly OT broken JT in chuck