Re: deepgroove Z-axis
Posted by
blackdiver99
on 2008-12-01 14:03:18 UTC
Search the CNCzone website for deepgroove; this problem and the
solution has come up before. Main problem seems to be caused by the z
axis gib being able to move longitudinally, which as it's tapered
allows it to lock fast by cam action until you change direction.
Tightening the gib end adjustment screws to remove all movement (plus
lots of lube) seems to do the trick.
solution has come up before. Main problem seems to be caused by the z
axis gib being able to move longitudinally, which as it's tapered
allows it to lock fast by cam action until you change direction.
Tightening the gib end adjustment screws to remove all movement (plus
lots of lube) seems to do the trick.
Discussion Thread
shawn c
2008-01-22 19:11:24 UTC
Flood coolant/cutting oil?
STAN MCDONALD
2008-01-22 19:26:31 UTC
Re: [CAD_CAM_EDM_DRO] Flood coolant/cutting oil?
Matthew Tinker
2008-01-22 20:12:21 UTC
Re: [CAD_CAM_EDM_DRO] Flood coolant/cutting oil?
shawn c
2008-01-22 21:20:55 UTC
RE: [CAD_CAM_EDM_DRO] Flood coolant/cutting oil?
Steve Blackmore
2008-01-23 00:15:33 UTC
Re: [CAD_CAM_EDM_DRO] Flood coolant/cutting oil?
ronald_41
2008-01-23 04:45:13 UTC
Re: Flood coolant/cutting oil?
a3sigma
2008-01-23 14:48:46 UTC
Re: Flood coolant/cutting oil?
Matthew Tinker
2008-01-26 14:07:48 UTC
RE: [CAD_CAM_EDM_DRO] Flood coolant/cutting oil?
Danny Miller
2008-11-11 21:38:04 UTC
deepgroove Z-axis
caudlet
2008-11-13 14:26:34 UTC
Re: deepgroove Z-axis
oznog2002
2008-11-28 14:49:50 UTC
Re: deepgroove Z-axis
Bob Butcher
2008-11-29 04:53:30 UTC
Re: deepgroove Z-axis
blackdiver99
2008-12-01 14:03:18 UTC
Re: deepgroove Z-axis