CAD CAM EDM DRO - Yahoo Group Archive

Re: Chinese to Quadrature conversion

Posted by dgoadby
on 2009-07-28 05:23:25 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Mack" <peterbmack@...> wrote:
>
> Does anyone have a solution for converting the output of chinese caliper/scales to standard quadrature output, so I can plug a chinese scale into a DRO?
>
> I've got QCC-100's to go Glass Quadrature output to Chinese output but haven't found a solution for the reverse.
>
> I want to add a caliper as the quill encoder on a turret mill. The glass scales get in the way of the quill stop, but I can squeeze a cut down caliper up above. The mill already has a 3 Axis DRO and glass scales on X and Y.
>
> Peter
>

Hi Peter,

There are lots of ad-hoc solutions to this but this article should start you off: http://www.tinaja.com/glib/muse145.pdf There are lots of links in there which will also help.

Regards

David

Discussion Thread

Peter Mack 2009-07-27 22:03:03 UTC Chinese to Quadrature conversion dgoadby 2009-07-28 05:23:25 UTC Re: Chinese to Quadrature conversion dgoadby 2009-07-28 05:24:39 UTC Re: Chinese to Quadrature conversion cafeagle 2009-07-28 10:54:58 UTC Re: Chinese to Quadrature conversion Roland Jollivet 2009-07-28 17:33:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese to Quadrature conversion Peter Mack 2009-07-28 18:43:40 UTC Re: Chinese to Quadrature conversion Peter Mack 2009-07-28 18:54:16 UTC Re: Chinese to Quadrature conversion Stephen Wille Padnos 2009-07-28 19:10:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese to Quadrature conversion Peter Mack 2009-07-29 05:24:46 UTC Re: Chinese to Quadrature conversion dgoadby 2009-07-29 05:38:47 UTC Re: Chinese to Quadrature conversion Wayne Patterson 2009-07-29 12:59:06 UTC Re: [CAD_CAM_EDM_DRO] Chinese to Quadrature conversion Alfredo Sola 2009-07-31 15:38:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese to Quadrature conversion Peter Mack 2009-08-07 05:14:09 UTC Re: Chinese to Quadrature conversion Geoff 2009-08-09 01:29:02 UTC Re: Chinese to Quadrature conversion