Re: Chinese to Quadrature conversion

Yes, that's easily do-able with different systems (I think YADRO could easily do this, as it already deals with summing the lathe compound and X axis, even if the compound is on an angle!).

First I need to get an encoder onto the quill while still having access to the stop, head clamp bolts etc.

Peter

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Roland Jollivet <Roland.Jollivet@...> wrote:
>
> I was just thinking that if you had the knee and the quill encoded, and feed
> the two inputs into a program, you could result in a single reading which
> would always be a correct distance between the two, irrespective if you move
> the knee or the quill.
>
> Regards
> Roland