Re: [CAD_CAM_EDM_DRO] Re: pulse generator
Posted by
David G. LeVine
on 2010-03-23 09:17:49 UTC
turbulatordude wrote:
(62P series) with or without detents and switches. See this example
<http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7292-ND>
for a sub $6 unit. You may need to go from quadrature to step/direction
signals, but that is simple logic. Get one with a built-in switch and
the knob can move and change axis all with one finger. Need details?
Let me know.
> you can buy all the components easy enough. look in the files section, there is at least one pulse generator schematic in there.Actually, for under $10.00 you can get 16 PPR encoders made by Grayhill
>
> Dave
(62P series) with or without detents and switches. See this example
<http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7292-ND>
for a sub $6 unit. You may need to go from quadrature to step/direction
signals, but that is simple logic. Get one with a built-in switch and
the knob can move and change axis all with one finger. Need details?
Let me know.
Discussion Thread
toolmkr
2010-03-20 10:12:46 UTC
pulse generator
Henrik Olsson
2010-03-20 10:39:08 UTC
Re: [CAD_CAM_EDM_DRO] pulse generator
Roland Jollivet
2010-03-20 12:26:57 UTC
Re: [CAD_CAM_EDM_DRO] pulse generator
stan
2010-03-22 10:02:43 UTC
Re: [CAD_CAM_EDM_DRO] pulse generator
Wade Penney
2010-03-23 02:44:53 UTC
pulse generator
Jamie Cunningham
2010-03-23 02:45:59 UTC
Re: [CAD_CAM_EDM_DRO] pulse generator
turbulatordude
2010-03-23 02:47:01 UTC
Re: pulse generator
johann_ohnesorg
2010-03-23 05:49:34 UTC
Re: pulse generator
David G. LeVine
2010-03-23 09:17:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: pulse generator
caudlet
2010-03-24 08:28:14 UTC
Re: pulse generator
Don Butterworth
2010-03-24 10:03:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: pulse generator
markotime
2010-03-25 05:39:47 UTC
Re: pulse generator