Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Posted by
Doug Harrison
on 2000-08-13 10:20:44 UTC
> I am looking to be able to calculate the number of cubic feet of gas atDepends on the gas. Helium, argon and other "ideal" gasses compress in
> standard atmospheric pressure that are in a cylinder at any given time.
>
linear relation to the pressure. Thus, volume is essentially proportional
to pressure - up to a point, which bottled gas is well below.
If it's oxygen, nitrogen, CO2 or most other gasses then you have a different
problem altogether. Oxygen is fairly linear up to about five atmospheres
(75 psia). Nitrogen and CO2 are not even close and for these you need
either a set of gas tables or a curve fit equation to do the calculations
you are after.
Let me know what the gas is and what pressure you are dealing with and I
will look for the numbers. I did some work on gas equations for NIST years
ago and might still have some of the data. At worst, I could look it up in
the gas tables.
Doug
Discussion Thread
JanRwl@A...
2000-08-12 22:24:03 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
JanRwl@A...
2000-08-12 22:29:17 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Jon Elson
2000-08-12 22:35:50 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Doug Harrison
2000-08-13 10:20:44 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Tim Goldstein
2000-08-13 10:58:24 UTC
RE: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
John Grant
2000-08-13 12:03:11 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Doug Harrison
2000-08-13 14:10:31 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
ptengin@a...
2000-08-13 14:27:44 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
John Grant
2000-08-13 15:35:04 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Tim Goldstein
2000-08-13 16:52:09 UTC
RE: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
JanRwl@A...
2000-08-13 16:54:58 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Doug Harrison
2000-08-13 18:37:29 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
Ejay Hire
2000-08-14 07:20:45 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?
dave engvall
2000-08-14 21:37:32 UTC
Re: [CAD_CAM_EDM_DRO] OT: Cubic Feet in a Compressed Gas Cylinder?