Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Posted by
Jon Elson
on 2011-02-15 19:41:43 UTC
Bryan Mumford wrote:
the extrusion in some manner.
Once you have the head out of the way, you can usually wipe the scale
with a Q-tip soaked in
rubbing alcohol, by just sliding it down the sealing lips. it will take
a number of Q-tips to
get it clean. Then, wait for it to dry, and wipe once or twice more
with dry Q-tips to remove the haze
left by the alcohol. It can be quite hard to SEE the condition of the
scale, although it may be possible
in some to get a micro-inspection mirror in there, and hold the sealing
lips open so you can see just a
little of the scale.
Jon
> I can't see how to get at the parts. The body is an aluminumAgain, they are all different, but usually the glass scale is glued into
> extrusion, open at the bottom edge where the reader rides, with end
> caps that seem to come off. Maybe the reader would slide out one end,
> but I can't imagine how you'd see or clean an encoder strip that runs
> the length of the extrusion.
>
>
the extrusion in some manner.
Once you have the head out of the way, you can usually wipe the scale
with a Q-tip soaked in
rubbing alcohol, by just sliding it down the sealing lips. it will take
a number of Q-tips to
get it clean. Then, wait for it to dry, and wipe once or twice more
with dry Q-tips to remove the haze
left by the alcohol. It can be quite hard to SEE the condition of the
scale, although it may be possible
in some to get a micro-inspection mirror in there, and hold the sealing
lips open so you can see just a
little of the scale.
Jon
Discussion Thread
microset3
2011-02-14 13:29:43 UTC
Sargon encoder disassembly help
Jon Elson
2011-02-14 19:45:21 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Bryan Mumford
2011-02-14 19:54:02 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Roland Jollivet
2011-02-14 23:19:06 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Jon Elson
2011-02-15 19:41:43 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Jon Elson
2011-02-15 19:43:53 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Bryan Mumford
2011-02-16 09:25:09 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Bryan Mumford
2011-02-16 12:28:37 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Jon Elson
2011-02-16 19:38:39 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
Jon Elson
2011-02-16 19:41:00 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help
David G. LeVine
2011-02-22 13:51:28 UTC
Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help