Re: [CAD_CAM_EDM_DRO] Sargon encoder disassembly help

Roland Jollivet wrote:

> If you can get the end cap off, as Jon says, it should slide out. The glass
> is usually glued into the channel, and not removable, so unless you've got
> some fine instruments, you're a bit stuck. Sounds like 'end of life' for the
> encoder?
>
> If you can get it apart, I would wash the scale with a soft brush and soap
> and water, then get it dried fairly quickly. Minimal rubbing on the scale.
>
>

No, the nichrome (or pure chrome) grating on the scale is actually QUITE
tough. You want to use solutions, only, to clean it, certainly no
abrasives. But, gentle brushing or wiping with clean wipes will not
hurt the grating. Q-tips work really well, I have done several scales
this way.

Jon